High Torque Cordless Metal Polisher

Flat-Surface Brilliance, Sustained Through the Hardest Pass

Polishing large flat or gently curved metal panels — automotive body panels, marine hull plating, commercial kitchen equipment — demands a different tool than the contoured belt systems used for round stock. Our high torque cordless metal polisher pairs a dual-action orbital and rotary motion head with a high-stall-torque 20V motor, allowing the operator to maintain consistent polishing pressure across large surface areas without the motor stalling under load, a common failure mode in lower-power cordless polishers when working compound is loaded onto the pad.

The variable speed range of 600 to 3,000 RPM covers the full polishing workflow, from aggressive compound cutting at lower RPM with wool pads to high-speed final glazing with foam finishing pads. A six-position speed lock allows the operator to set and maintain a consistent RPM regardless of trigger pressure variation, critical for achieving an even finish across a large panel where speed inconsistency shows up as visible swirl variation under inspection light. The 180mm pad size matches industry-standard backing plates and polishing pad systems, ensuring compatibility with existing consumable inventories.

Heat management is engineered specifically for sustained polishing duty. The motor housing incorporates additional cooling vents and a larger internal fan than standard angle grinders converted for polishing use, preventing the thermal shutdown that interrupts work on long panel runs. The soft-start function eliminates the sudden torque reaction that can fling polishing compound or mar a freshly painted surface when the trigger is first engaged — a detail that matters significantly to automotive refinish professionals working on customer vehicles.

The extended side handle, positioned for two-hand control during heavy compound cutting, detaches for single-hand operation during lighter glazing passes, adapting the tool's ergonomics to the polishing stage being performed. Battery runtime on the 20V platform supports a full detailing session without a mid-job pack swap. For body shops, marine refinishers, and metal fabrication finishing departments who need dependable, stall-free polishing power without an air compressor or extension cord, this polisher delivers professional, consistent results panel after panel.

Where Our Metal Polisher Excels

• Automotive paint correction- Compound cutting and finishing on body panels in collision repair shops.
• Marine hull and deck finishing- Restoring gelcoat shine on fiberglass and polished metal fittings.
• Commercial kitchen equipment- Mirror finishing on stainless steel prep tables and appliance panels.
• Motorcycle and powersports detailing- Chrome and aluminum component polishing on tanks and fenders.
• Architectural metal panels- Final finishing on large stainless or aluminum cladding sections.
• Industrial vessel refinishing- Surface restoration on tanks, vats, and processing equipment exteriors.

• Anti-Stall Performance:High-torque motor sustains pad speed even under heavy compound and pressure loads.
• Locked Speed Consistency:Six-position lock removes trigger-pressure variation as a source of finish inconsistency.
• Compound-Safe Startup:Soft-start eliminates the sudden torque kick that flings polish or mars fresh paint.
• Standard Pad Compatibility:180mm M14 spindle works with existing wool, foam, and microfiber pad inventories.
• Thermal Management:Enhanced cooling vents prevent overheating during long, continuous polishing sessions.
• Adaptive Grip Configuration:Side handle attaches for cutting passes and detaches for precision glazing control.
• Low Vibration Transfer:Balanced dual-action head reduces hand fatigue during extended detailing sessions.

Trade Terms

Standard terms are 30% T/T advance with balance against B/L copy; L/C at sight accepted for orders above 500 units. EXW, FOB, and CIF pricing structures available on request.

Logistics & Delivery

• Ocean Freight:Standard for bulk orders; consolidated LCL available for smaller trial shipments.
• Express Air:Recommended for urgent sample evaluation or emergency restocking.
• Customs Support:Pre-shipment inspection and full export documentation package included.
• Regional Warehousing:Bonded warehouse options available in key overseas markets for faster fulfillment.