English
русский
Español
Portable
Brushless
Table Saw
CE Certified
GS Approved
ETL Listed
RoHS Compliant
Compact Cordless Table Saw
Compact Cordless Table Saw - Professional rip-cutting accuracy with total cordless freedom on any job site
Blade Diameter210mm
Max Rip Capacity450mm - 610mm
No-load Speed0-5800 RPM
Motor TypeBrushless High Torque
Our Products
Browse our full catalog of professional power tools
Product Introduction
Industrial Rip-Cutting Power Without the Cord
The compact cordless table saw brings workshop-level ripping capacity to the heart of the construction site. For professional deck builders, flooring contractors, and trim carpenters, this saw provides the essential ability to rip full-sized plywood sheets and dimensional lumber without the need for a portable generator or hundreds of feet of extension cords. The high-performance brushless motor is engineered for high-velocity cutting, delivering up to 5,800 RPM. This high blade speed ensures that even deep rip cuts in dense hardwoods like oak or maple are completed cleanly and without motor bogging, providing a finish quality that rivals stationary workshop units.
Accuracy is anchored by a precision rack-and-pinion fence system. This design ensures that the fence remains perfectly parallel to the blade at all times, allowing for millimetric adjustments that won't move during the cut. The rip capacity is optimized to handle standard 4x8 sheets, making it a versatile tool for both framing and finish work. The 210mm carbide-tipped blade is driven by an intelligent electronic controller that monitors the load and adjusts power delivery from the 20V or 40V lithium-ion batteries. This technology maximizes efficiency, allowing for over 150 linear meters of ripping on a single charge of high-capacity batteries.
Safety features in our cordless table saw are industry-leading. An integrated electronic brake stops the blade in seconds after the switch is turned off, while a comprehensive guard system and riving knife prevent kickback and protect the operator. The tool also includes a modular guard system that can be adjusted without tools for different material thicknesses. Dust management is exceptionally efficient, featuring a large dust port that captures the majority of waste when connected to a site vacuum. The lightweight, compact chassis is designed for easy one-handed transport, fitting easily into a work van or a job site storage box.
The durability of our table saw is guaranteed through a reinforced roll-cage design that protects the tool from drops and impacts on busy sites. The table surface is coated with a low-friction material to ensure smooth material feeding, while the brushless motor eliminates the need for brush changes and provides a significantly longer operational life. For contractors who demand the highest level of rip-cutting precision and mobile power, this cordless table saw is the ultimate solution, delivering the performance of a corded saw with the total flexibility of the cordless platform.
Rack & Pinion Fence
Ensures the fence stays perfectly parallel for precise, repeatable rip cuts every single time.
High RPM Brushless
Delivers 5,800 RPM for clean, high-speed ripping in thick hardwoods and structural lumber.
Extended Rip Capacity
Optimized table design handles large 4x8 sheets and wide planks for total job site versatility.
Roll Cage Durability
Heavy-duty steel roll cage protects the saw from site impacts and ensures long-term structural integrity.
Technical Specifications
| Voltage | 20V / 40V Max |
| Blade Diameter | 210 mm |
| No-load Speed | 5800 RPM |
| Max Rip (Right) | 610 mm |
| Max Rip (Left) | 310 mm |
| Max Depth (90آ°) | 65 mm |
| Motor Type | High-Torque Brushless |
| Table Material | Cast Aluminum |
| Weight | 22.0 kg |
| Fence Type | Rack & Pinion Sliding |
| Battery System | Dual 20V or Single 40V |
| Warranty | 1 Year Professional |
Industrial and Commercial Applications
Where Our Table Saw Excels
- Plywood sheet ripping - Essential for flooring sub-structures and wall sheathing.
- Hardwood flooring installation - Precise ripping of planks to fit tight wall edges.
- Exterior siding work - Fast, accurate cutting of cedar or composite siding boards.
- Cabinet installation - Ripping fillers and scribe pieces for a perfect custom fit.
- Decking construction - Ripping rim joists and deck boards to exact dimensions.
- Interior remodeling - A portable powerhouse for any structural or trim-based ripping task.
ًںڈ—ï¸ڈ Construction Sites
The perfect primary saw for site-based ripping where corded power is difficult to access.
ًںھµ Professional Trim
Offers the precision required for fine carpentry in a package that fits easily in a contractor's van.
Unmatched Technical Advantages
- Brushless Efficiency: Sustains high blade speed under load with minimal energy energy loss.
- Precision Rip Control: Rack and pinion system is the industrial standard for accuracy.
- Modular Safety: Guard and riving knife can be swapped or adjusted without tools.
- Low Friction Table: Special coating ensures smooth, safe material feeding.
- On-Board Storage: Keeps push sticks, gauges, and wrenches secure during transport.
- Electronic Brake: Rapid stop technology significantly reduces the risk of injury.
- Site Portability: Designed for one-person transport with an integrated handle.
- Dust Extraction: High-volume port keeps the workspace and the air clean.
Global Logistics and Payment
Payment Terms
T/T 30% deposit, L/C, or Net 30 for industrial partners. FOB Ningbo/Shanghai pricing.
Shipping Options
- Sea Freight: Palletized container shipping for maximum protection of large saws.
- Inland Logistics: Support for rail and road freight to major logistics hubs.
- Packaging: Triple-wall reinforced industrial carton with custom internal bracing.
- Documentation: Full CO, Bill of Lading, and Quality Certification provided.
Frequently Asked Questions
Q: Can it rip a 4x8 sheet?
A: Yes, with the fence extended it has a 610mm rip capacity, perfect for half-sheets or full sheet rips.
Q: How many meters of cut per charge?
A: Approx. 150 linear meters in 18mm OSB using dual 4.0Ah batteries.
Q: Is a stand included?
A: Sold as a tabletop unit; matching rolling stands are available separately.
Q: Does it have a brushless motor?
A: Yes, it features our high-torque industrial brushless motor for maximum rip speed.
Q: Can I use it for bevel rips?
A: Yes, the blade bevels up to 45 degrees for specialized joinery.
Q: Is it heavy?
A: At 22kg, it is designed to be the lightest professional table saw in its class.
Q: What blade does it use?
A: It uses a standard 210mm blade with a 25.4mm or 30mm arbor.
Q: Does it work with one battery?
A: For best performance, our 40V model requires two 20V batteries connected in series.
Q: Is the fence accurate?
A: Yes, the rack and pinion system ensures millimetric accuracy that won't drift.
Q: What is the warranty?
A: 1-year professional industrial warranty is standard.
Comprehensive B2B Supply Information
| MOQ | 100 Units |
| Lead Time | 50-60 Days |
| Packaging | Industrial Triple-Wall Carton |
| Certifications | CE, GS, ETL, UL |
| Table Flatness | +/- 0.5 mm |
| Monthly Capacity | 3,000 Units |
| Testing | Motor Torque & Rip Accuracy |
| Custom Options | Color, Logo, Stand Bundle |
| Technical Support | Service Parts & Video Guide |
| Warranty | 1 Year Industrial |
Request a Quote / Inquiry
