English
русский
Español
Cordless
Metal
Shears
CE Certified
GS Approved
ETL Listed
RoHS Compliant
Cordless Metal Shears
Cordless Metal Shears - Straight and curved sheet metal cutting up to 2.5mm at professional speed with total on-site freedom
Cutting Capacity (Steel)2.5mm Mild Steel
Cutting SpeedUp to 4 m/min
Min. Curve Radius30mm
Battery Voltage18V Li-Ion
Our Products
Browse our full catalog of professional power tools
Product Introduction
Industrial Sheet Cutting Speed With Complete Cordless Mobility
Cordless metal shears represent the peak of portable sheet metal cutting technology for professional contractors and fabricators. Powered by a high-torque 18V brushless motor and a precision double-blade cutting head, these shears deliver straight-line cutting speeds of up to 4 meters per minute through mild steel up to 2.5mm, stainless steel up to 1.8mm, and aluminum up to 3.0mm. The dual-cutting blade design produces a clean, straight kerf without the burrs or distortion associated with angle grinders or circular saw cutting.
The offset cutting head geometry positions the body of the tool above the sheet surface, allowing effortless long-run straight cuts as well as tight radius curves down to 30mm. This versatility transforms the shears from a simple straight-cutting tool into a highly capable profiling instrument for complex panel shapes. The upper blade is spring-loaded for automatic return, maintaining consistent blade gap and eliminating the manual adjustment that slows production on conventional bench shears. The large chip deflector directs metal swarf away from the cutting line and the operator's hands.
The cutting head can be rotated to four positions to provide optimal tool orientation for both horizontal and vertical cuts. This rotational head, combined with the balanced weight distribution of the cordless platform, enables overhead panel cutting and wall cladding installation with significantly reduced operator fatigue. The precision-hardened blades maintain cutting sharpness through thousands of meters of cutting before requiring replacement, and their quick-release system allows site-level blade changes in under two minutes without specialist tools.
Designed for longevity in punishing site environments, the all-metal drive mechanism is sealed against ingress of swarf and moisture. The 18V battery pack integrates with our extended professional platform, enabling tool sharing across sites. For HVAC installers, cladding contractors, and sheet metal shops requiring a portable, fast, and precise cutting solution, our cordless metal shears deliver unmatched professional performance.
Dual-Blade Clean Cut
Two precision-ground blades produce a straight, burr-free kerf without heat distortion or sheet deformation.
30mm Minimum Radius
Tight-curve capability enables complex panel profiles and curved cutouts without changing tools.
4-Position Rotating Head
Cutting head rotates to four locked positions for optimal ergonomic angle on any cutting orientation.
Quick-Release Blades
Tool-free blade change system allows fast replacement on site without downtime or specialist equipment.
Technical Specifications
| Voltage | 18V Li-Ion |
| Cutting Speed | 4 m/min (max) |
| Capacity – Mild Steel | 2.5 mm |
| Capacity – Stainless | 1.8 mm |
| Capacity – Aluminum | 3.0 mm |
| Min. Curve Radius | 30 mm |
| Head Rotation | 4 × 90° |
| Blade Material | Precision-Hardened Tool Steel |
| Blade Life (mild steel) | Approx. 500 m |
| Weight (tool only) | 2.1 kg |
| Drive Mechanism | All-Metal Sealed Gearbox |
| Warranty | 1 Year Professional |
Industrial and Commercial Applications
Where Our Metal Shears Excel
- Metal cladding installation- Long straight runs on steel cassette panels and profiled wall cladding.
- HVAC sheet work- Fast, accurate panel cutting for ducts, plenums, and air handling enclosures.
- Steel framing- Trimming and profiling light-gauge steel framing channels on-site.
- Automotive panel repair- Curves and irregular shapes on replacement body panels.
- Electrical enclosures- Clean openings in switchboard and panel steel without secondary finishing.
- Roofing fascia trimming- Fast straight cuts on aluminum and galvanized fascia profiles.
Cladding Contractors
Cuts long runs of wall cladding panels precisely and quickly without generating dangerous sparks or heat.
Electrical Installers
Creates clean, accurate penetrations and knockouts in steel cable management enclosures.
Unmatched Technical Advantages
- Clean Dual-Blade Kerf:Produces straight, burr-free edges that eliminate the need for secondary deburring in most applications.
- No Sparks or Heat:Mechanical shearing action is safe near coatings, sealants, and combustible building materials.
- High Cutting Speed:4 m/min throughput significantly outperforms nibbler-based or jigsaw-based sheet metal cutting.
- Curve-Capable Head:30mm minimum radius expands the tool's capability to complex profiles and shapes.
- Spring-Return Upper Blade:Automatic blade return maintains consistent cut gap throughout long cutting runs.
- Chip Deflection System:Integrated deflector redirects cut chips away from the operator and the cutting guideline.
- Overhead Cutting Geometry:Tool-offset head allows cuts directly on installed panels without removal.
- Sealed Drive Train:All-metal, swarf-resistant gearbox ensures reliability in demanding production environments.
Global Logistics and Payment
Payment Terms
T/T 30% deposit, L/C, or Net 30 for industrial partners. FOB Ningbo/Shanghai pricing available.
Shipping Options
- Sea Freight:Full container or LCL palletized shipment with foam-in-place protection.
- Air Freight:Available for urgent sample orders; DDP and DAP terms supported.
- Inland Logistics:Rail and road connections to major Chinese export hubs.
- Documentation:Full CO, Bill of Lading, MSDS, and Quality Certification supplied.
Frequently Asked Questions
Q: Can it cut stainless steel?
A: Yes, up to 1.8mm stainless steel with the standard hardened blade set.
Q: What is the tightest curve it can cut?
A: The minimum cutting radius is 30mm, sufficient for most panel profile work.
Q: Are replacement blades available?
A: Yes, OEM and compatible replacement blade sets are available; each set lasts approximately 500 meters in mild steel.
Q: How fast does it cut?
A: Up to 4 meters per minute in 1.5mm mild steel sheet at full speed.
Q: Can I cut aluminum?
A: Yes, up to 3.0mm aluminum sheet, making it ideal for façade cladding and marine panel work.
Q: Does the head rotate?
A: Yes, the cutting head has four 90-degree lock positions for ergonomic orientation on any cutting plane.
Q: Does it produce sparks?
A: No. The shearing action is entirely mechanical and produces no heat or sparks.
Q: How long does the battery last?
A: A 4.0Ah 18V battery provides approximately 60–90 minutes of intermittent cutting in standard gauge steel.
Q: What certifications does it carry?
A: CE, GS, ETL, and RoHS certification for global market distribution.
Q: What is the warranty?
A: 1-year professional industrial warranty covering motor, gearbox, and cutting mechanism.
Comprehensive B2B Supply Information
| MOQ | 150 Units |
| Lead Time | 40-50 Days |
| Packaging | Foam-Lined Carton with Spare Blade Set |
| Certifications | CE, GS, ETL, RoHS |
| Blade Life Testing | 500m in 1.5mm Mild Steel |
| Monthly Capacity | 4,500 Units |
| Testing | Cut Speed & Edge Burr Measurement |
| Custom Options | Blade Grade, Color, Logo, Case |
| Technical Support | Blade Replacement & Adjustment Video |
| Warranty | 1 Year Industrial |
Request a Quote / Inquiry
