Brushless Cordless Band Saw

Quiet, Continuous Cutting in a Compact Portable Footprint

Band saws occupy a unique niche in metal fabrication: where a circular saw or grinder is too aggressive and a hand hacksaw is too slow, the continuous-loop blade of a band saw delivers a controlled, low-noise cut with minimal kerf loss. Our brushless cordless band saw brings this capability fully off the cord, powered by an 18V motor driving the blade at a fixed 90 meters per minute through a sealed two-wheel drive system. The continuous cutting action — rather than the reciprocating or rotary motion of competing tools — produces dramatically less vibration, allowing operators to maintain a steady cut line through long, fatigue-free sessions.

The cutting capacity of 100mm x 100mm accommodates the vast majority of structural angle, channel, tube, and solid bar encountered in fabrication and maintenance work. A 64-tooth bi-metal blade is standard, chosen for its balance of cutting speed and edge life across mixed ferrous materials. The blade tracking mechanism uses spring-tensioned guide rollers that self-adjust to compensate for blade stretch over its service life, maintaining a true, square cut without operator intervention or manual realignment procedures.

A folding base plate converts the saw between handheld free-cutting mode and a stable bench-mounted configuration for repetitive cutting tasks, giving fabrication shops two tools in a single purchase. The LED cutting line indicator projects a visual reference directly onto the workpiece, improving accuracy on layout marks even in dim site conditions. Blade changes require no tools — a quarter-turn tensioning lever releases the blade for swap-out in well under a minute, minimizing downtime during multi-material jobs.

The drivetrain houses a sealed gearbox lubricated for the life of the tool, eliminating a maintenance task that plagues lower-grade band saws. Because the cutting action generates significantly less heat than abrasive methods, blade life extends well beyond typical job-site expectations, and material discoloration from heat is virtually eliminated. For plumbers, HVAC technicians, and metal fabricators who need a quiet, accurate, repeatable cutting tool that won't disturb a job site or damage finished surfaces nearby, this band saw earns a permanent place in the tool bag.

Where Our Band Saw Excels

• Plumbing and pipefitting- Clean, square cuts on copper, steel, and threaded pipe without burr.
• Structural angle and channel- Repeatable bench cutting for fabrication production runs.
• HVAC refrigeration lines- Low-vibration cutting that protects delicate tubing from deformation.
• Noise-sensitive environments- Hospitals, offices, and residential job sites where grinder noise is restricted.
• Maintenance and repair shops- On-demand cutting of mixed-material stock without tool changeover.
• Scaffold and rack fabrication- Accurate angle and tube cuts for modular assembly work.

• Lowest Noise in Class:Continuous blade motion operates at 78 dB(A), far below grinders or reciprocating saws.
• Minimal Kerf Waste:Narrow blade profile conserves material on expensive alloy and stainless stock.
• Self-Tracking Blade:Eliminates the manual tracking adjustment required by lower-grade band saws.
• Dual-Mode Versatility:One purchase delivers both a handheld cutting tool and a stable bench saw.
• Cool Cutting Action:Lower heat generation extends blade life and prevents discoloration of finished material.
• Tool-Free Blade Swap:Quarter-turn tensioning lever allows blade changes in under a minute.
• Lit Cutting Reference:Projected LED line improves cut accuracy without squinting at pencil marks.

Trade Terms

Standard terms are 30% T/T advance with balance against B/L copy; L/C at sight accepted for orders above 500 units. EXW, FOB, and CIF pricing structures available on request.

Logistics & Delivery

• Ocean Freight:Standard for bulk orders; consolidated LCL available for smaller trial shipments.
• Express Air:Recommended for urgent sample evaluation or emergency restocking.
• Customs Support:Pre-shipment inspection and full export documentation package included.
• Regional Warehousing:Bonded warehouse options available in key overseas markets for faster fulfillment.